PT Elsiscom Prima Karya

Features

• Identifying & Answering visitors
  Your door security can be controlled with the JK Series advanced door entry system 24 hours a day from anywhere in the network.
• Controlling Wide and Zoom & PanTilt
  Take advantage of the JK Series advanced features using a PC!
  • Zoom
    To see the details, switch the picture mode to Zoom mode. Switching between Wide and Zoom mode can easily be done by the click of a button.
  • PanTilt
    Click the PAN/TILT button to change the camera angle in Zoom mode.
• Releasing the door lock
  If the visitor is permitted entry, release the door lock. The door release button turns red to clearly identify the door lock has been released.
• Room to room communication
  You can make mutual calls between the PC software and the JK Master Monitor Station.
• Recording and Playing video & audio
  The PC software records video and audio of the entryway where the video intercom system is connected to the JKW-IP and can be played on the PC.
• Adjusting image
  Monitors can be adjusted for low light and nighttime settings, as well as bright and heavy blacklight.
• Getting e-mail to your PC, PDA, or mobile phone
  Whenever a door call, sensor detection, or system start up occurs, the JKW-IP sends an e-mail to your preset addresses.

System Configuration

System Configuration I

For centralized management of multiple entrances using PC(s)

System Configuration II

For distributed management of a specific entrance using multiple PCs

Q & A

OPERATION

Q1 :

Why doesn't the image from door station change smoothly or doesn't change?
Why does the sound interrupt spottily?

A1 :

The network bandwidth may be not enough.
Sets lower the Frame Rate and the Quality of Video Setting of Network from the Administrator Settings window.
The Network bandwidth requires more than 320kbps (frame rate 1fps & quality 1) for one IP Video Intercom Adaptor./dl>

---

Q2 :

Why is starting up the PC Application slow?

A2 :

When a lot of the Recorded files are stored, starting up the PC Application may be slow.
When a lot of IP Video Intercom Adaptors are connected, start up of the PC Application may be slow.
In addition, continuous OS operation makes the computer's performance worse. Reboots computer.

---

Q3 :

A Frame Rate becomes slow when the number of connecting the PC Application increases.

A3 :

Frame rates becomes less by the number of connecting PC at the time of the call from door station.

		Setting of Frame rate
		15	10	5	1
# of PC	1	15	10	5	1
	2	7	5	2	1
	3	5	3	1	1
	4	3	2	1	1
	5	3	1	1	1
	6	2	1	1	1
	7	2	1	1	1
	8	1	1	1	1
	9	1	1	1	1
	10	1	1	1	1

Example: "# of PC Application 5" & "Setting of Frame rate" 15 becomes about 3fps.
When communication starts, the Frame rate becomes settings.

---

Q4 :

Why doesn't the PC Application connect with the IP Video Intercom adaptor?
Why doesn't the image from the door station appear?
Why doesn't the sound come?

A4 :

The ports may be used to other applications already. Changes the ports number.
The ports "65060", "65061", and "65062" are not available to set for Audio Port.
Changes Audio Port to other port number.
Depending on the router, the port numbers which were selected by UPnP are memorized until the power switch is off. Reboots the router, if necessary.
Refer to the instruction manual of the router, in order to investigate the port number currently used with the router.

---

Q5 :

The picture doesn't record anymore with the message of "CANNOT RECORD. SPACE IS FULL".

A5 :

Delete or remove recorded files from "Aiphone_JKW_Rec" folder.

---

Q6 :

The display of the setting screen of the IP Video Intercom Adaptor became strange.

A6 :

Delete temporary Internet files, delete webpage history, delete forms etc. from the "Tools" ⇒ "Internet Option" in Internet Explore.
Then reopen setting screen of IP Video Intercom Adaptor.

---

Q7 :

Why doesn't the sent date & time have on the e-mail?

A7 :

Depend on the e-mail service, there is the date & time of sent as well as recording one. JKW-IP doesn't have clock inside, so that sending date & time is not given.

---

Q8 :

Why isn't e-mail transmitted although "Email" setting was performed?

A8 :

DNS server setting is required at Network of the Administrator Settings.
Input into DNS server column the IP address by the side of LAN of the broadband router which has connected IP Video Intercom Adaptor.
Or input the IP address of DNS server specified as the DNS server column by the provider.
The setting is required when SMTP sever is setup by URL.

---

SETTING

Q1 :

Why can't the router set when UPnP is on?

A1 :

It is required manual setting (port forwarding settings). Refer to the list of supported routers.
Refer to the router's instruction manual for the manual settings (port forwarding settings).

---

Q2 :

It is necessary to change port numbers when plural PC Applications or IP Video Intercom Adaptors are used in Global.

A2 :

It is required to set the port number doesn't overlap. The details will come soon.

---

Q3 :

Why doesn't receive a call etc. approximately 5 min. after reboot by power failure or changing Network Setting?

A3 :

Perform "Disconnect" and "Connect" of corresponding adaptor in PC Application.
When the setting of Network Setting is changed, "Disconnect" corresponding adaptor. Then reinput changed setting, and "Connect" adaptor again.

---

Q4 :

Why does the PC Application close after the setting of "LANGUAGE Settings", "Picture Recording Mode Settings", "Max Recording Space Settings", "Auto Recording Settings", or "Audio Recording Settings" in Preference of the PC Application?

A4 :

In those settings, closes PC Application as well as Setting screen. Restart PC Application.

---

Q5 :

Is there any SMTP sever can't be used with JKW-IP?

A5 :

The free e-mail service like Yahoo Mail, Gmail, Hotmail can't be used SMTP sever for JKW-IP.
Use specified SMTP sever from your provider, and also SMTP sever is required to apply SMTP authorization, CRAM-MD5.

---

Q6 :

The FTP server of Windows can't be used, because Windows XP Home Edition is used.

A6 :

There isn't "Firmware Update" at this moment, so FTP sever is unnecessary.

---

Q7 :

Which kind of VPN can be used with JKW-IP?

A7 :

Use VPN which is available to communication at Layer2 level.

---

Q8 :

What is the Encryption Key File? When it is required to update?

A8 :

It is the unique encryption key in each IP Video Intercom Adaptor in order to encrypt door release and option output command.
The Encryption Key File is common in each IP Video Intercom adaptor. Update the Encryption Key File is recommended regularly or when the user is changed.
When updating the Encryption Key File, you need to download the Encryption Key and make settings for all PC Application.

---

Support

Supported routers